您所在的位置:首页 > 公司产品 > 井间地震监测
井间地震监测

GeochainSlim™

作者:管理员 来源: 日期:2014-6-25 11:35:19 人气:

 

GeochainSlimTM Slim Well Seismic Instrumentation

The GeochainSlimTM is the next development of the field proven VSP and hydraulic fracture monitoring. This system has been designed for use in open or cased holes with all locking arms opening simultaneously to reduce survey time. A maximum bandwidth of 1600Hz, very low electronic noise levels and slim size make the system ideal for hydraulic fracture surveys.

The established extra high sensitivity GeochainTM Quad geophone sensor pack has now been integrated into the GSR design and is now available as a standard configuration. The GeochainSlimTM system also benefits from the new gapless recording functionality* which is ideal for the continuous requirements of passive monitoring.


Features

 

  • Ideal for VSP & Microseismic surveys
  • Up to 100* satellites
  • Slim 1 11/16” (43mm) Outside Diameter Tool
  • Unique Active Cooling System for continuous operation at 180oC.
  • 20,000psi (1400 bar) pressure rating
  • Standard 7 conductor wireline with GO7 connection
  • Real time data transmission
  • Extra sensitive QUAD 3 component sensor
  • 24-bit delta sigma convertors
  • Up to 200m (>600’) between satellites
  • Operates with all standard ASL surface panels
  • Gapless recording for passive monitoring surveys
  • Tractor deployment capability

 


Functionality

 

The GeochainSlimTM Receiver (GSR) innovative design packages all the functionality of the acclaimed ASR-1 receiver into a much slimmer housing.  The GSR tool is a compact three component electromechanical downhole geophone. It is designed for use in wells up to 20,000psi and 180oC (digital) 200oC (analogue) and provides a fast arm cycle time with an arm force to weight ratio of 5:1. It can be easily and quickly converted from an analogue system (up to two tools) to part of a multilevel digital GeochainSlimTM system.

The downhole distributed electronics features 24 bit Delta-Sigma converters along with switchab14le downhole gain for maximum dynamic range. Continuous PLL synchronisation to the surface clock allows for very long record lengths* with no timing skew.

Full in field processing is provided by our highly praised ACQ software suite and VSProwess (supplied with each system purchase) enables complex data processing to be performed at the rig site.

The GSR is a development of the well tried and tested ESR tool and has been designed so as to require very little servicing.  Routine maintenance can be performed in a few minutes and even a complete overhaul can be accomplished in less than an hour.

 

The GSR comes with a three component sensor pack as standard. The sensors are fixed Quad high sensitivity OMNI-2400 15Hz geophones which are suited to both VSP and fracture monitoring surveys. The sensor pack will work in any orientation from vertical through to horizontal.

An optional gamma ray tool or CCL can be used for depth correlation and line 7 (on hepta cable) is free for use with any third party tools that meet the single conductor power requirements.

The standard arm will accommodate boreholes from 1-7/8” to 7” and an extended arm can be used to increase this range to 13”. The locking force is constant to within 20% throughout its operating range and will lock into 3-1/2” drill pipe in fifteen seconds.  The arm mechanism has a failsafe feature to facilitate recovery of the tool in the event of downhole failure.

The tool can be used in single or dual tool analogue mode and can be combined with our GRT-3 Gamma Ray tool for depth correlation. The GSR receivers accommodate a modular construction 25’ rigid inter tool connector rated to 20,000psi, 200oC. This low maintenance item provides precise tool alignment and can be coupled together to give a 50’ spacing.

In digital mode the tool can be combined to a maximum of 100 levels with 200m spacing between levels (all using standard seven conductor wireline throughout).


Digital Operation

 

When used in digital mode, the GeochainTM employs the STAS-1 Slim Telemetry Adapter Section and SVRS-1 Slim Voltage Regulator Section at the top and bottom of the tool string respectively.  The ASR-1 downhole satellites are populated with the distributed electronic modules featuring 24 bit Delta-Sigma converters for maximum dynamic range along with real time data transmission and display. Constant synchronisation of the string allows for very long record lengths.

Our unique active cooling system (ACS) allows continuous operation up to 180oC within a hermetically sealed environment, and the robust telemetry system will ensure operation in the harshest conditions.

Up to 50 satellites can be used in the array with a maximum tool spacing of >600 feet (200m).


Analogue Operation

 

The system can be modified to a low cost yet robust Analogue set up, for high temperature (200oC) surveys.

This mode of Geochain Operation is ideal for very hostile well deployment such as deep check shot surveys. The requirement of only the GSR tool and no other telemetry/electronic devices (Gamma tools optional) allows the GeochainSlim Analogue to be one of the most economic borehole seismic survey systems on the market.


Specifications

 

GSR-1 Geochain Slim Receiver
GSR-1 Satellite Specifications  
Length 44” (1135mm)
Diameter 1 11/16” (43mm)
Weight 19.5lbs (8.85kg)
Max locking range 7” (178mm) Standard or 13” (330mm) with long arm
Max locking force 300 lbs (Standard Arm)
Temperature 400oF (204oC) Analogue, 180oC (Digital)
Pressure 20,000psi (1400 bar)
Sensors 3 Component Fixed – SMC 2400 15Hz Omni- Quad
Well Deviation Control 0o-95o
Panels GPP & GSP-1 (Digital)
  DCP-2 & GSP-1 (Analogue)
  WMP – (Optional Wireline QC Tool)

 

System Specifications
Downhole Specifications  
Max. No. of Satellites 100*
Telemetry Sample interval Bandwidth Hz GSR’s
  1/4ms 1600 8 (16)
  1/2ms 800 16
  1ms 400 32
  1.5ms 266 48
Dynamic Range >112dB @ 0dB pre-gain (minimum)
A/D convertor 24 bit Delta-Sigma
Distortion <0.02%
DC offset Self-calibrating
Max. data rate
1.536Mbit/second
Min. data rate 256kbit/second

 

Surface Specifications  
Recording panel GPP and GSP-1 (Digital) DCP-2 and GSP-1 (Analogue)
Software ASL Acquisition Suite and Copy of VSProwess© Processing Software
Cable equalisation Fully automatic using internal DSP chip
Down-going data rate 2 kbit/second
Airgun firing pulse 60 V, 30ms
Test system Fully automatic with comprehensive report generation
PC Interface USB
Power Requirements 100/230 V AC, 47-63 Hz universal input, 30 watts
Operating Temp 0-500F
Enclosure Standard 19” rack mounting

 

 

 

 

 

上一篇: Geochain EHP™
公司产品
更多>>联系

北京艾敏思科技发展有限公司

联系人:梁先生
邮 箱:info@amseismic.com
地 址:北京海淀清河东滨河路4号2号院C108